- HOME
- PRODUCT
- PROCESS METALISH
PROCESS
BANDI
METALISH SYSTEM
Application & Removal
STEP 1Pre-treatment for METALISH treatment
- 01. Trim the shape and length of nails with BANDI wood file.
- 02. After soaking cuticles with BANDI Gelique Fresh, remove loose skin and arrange around cuticle using pusher and nipper.
- 03. Put BANDI Gelique Fresh Starter on nail wipe and rub it up ad down.
STEP 2Applying METALISH Base Gel
- 01. Apply METALISH Base Gel to 1Coat natural nails.
- 02. 1 minute curing on UV lamp / 30 seconds curing on LED lamp.
- 03. Clean the uncured gel with alcohol.
TIP
If air bubbles are generated, raise and drag it down to remove the air bubbles.
CAUTION
Apply quickly to prevent lines. If it stick to the skin, it will be colored, so clean immediately with a remover.
STEP 3Applying METALISH Color Gel
- 01. Take an appropriate amount of METALISH color gel and apply 1Coat thinly to cuticle line and free edge thoroughly.
- 02. Dry quickly with had dryer to polish enough.
- 03. Take an appropriate amount of METALISH color gel and apply 2Coat not to make lines.
- 04. Dry quickly with had dryer to polish enough.
TIP
METAL coloring is more effective when 1Coat.
CAUTION
Apply quickly to prevent lines. If it stick to the skin, it will be colored, so clean immediately with a remover.
STEP 4Applying METALISH Top Gel
- 01. Apply Shine Trop Gel on top of METALISH 2Coat. Fill the cuticle line full, and wrap the free edge thoroughly and apply thin.
- 02. 3 minutes curing on UV lamp.
TIP
If you want it to stay longer, apply Gelique Base & Top gel after Step4.
METALISH OFF Step
- 01. Filing Top Gel for peeling off.
- 02. Remove METALISH with polish remover.
- 03. Cover the Gelique Remover with nail wrap cotton for 10 minutes.
- 04. Unfold nail wrap and remove the remaining gel. At this time, use wood stick or pusher lightly.
- 05. Finish with sanding.
- 06. Apply moisturizing nutrient ample to nourish damaged nails when off.
